Enterasys Matrix 2G4072-52 - Default Chapter; Show Netflow

Logging And Network Management Command Set
Configuring NetFlow
Matrix DFE-Platinum and Diamond Series Configuration Guide 11-155
11.2.8.1 show netflow
Use this command to display NetFlow configuration information and/or statistics.
show netflow [config [port-string]] [statistics [export]]
Syntax Description
Command Defaults
If no parameters are entered, both NetFlow configuration and statistics are
displayed.
Command Type
Switch command.
Command Mode
Read Only.
Example
This example shows how to display both Netflow configuration information and statistics
:
config (Optional) Show the NetFlow configuration.
statistics (Optional) Show the NetFlow statistics.
export (Optional) Show the NetFlow export statistics.
Matrix(rw)->show netflow
Matrix N-SA Platinum(su)->show netflow
Cache Status: enabled
Destination IP: 10.10.1.1
Destination UDP Port: 2055
Export Version: 5
Export Interval: 30 (min)
Number of Entries: 196607
Inactive Timer: 40 (sec)
Template Refresh-rate: 20 (packets)
Template Timeout: 30 (min)
Enabled Ports:
-----------------
ge.1.11,23