Enterasys Matrix 2G4072-52 - Clear Spantree Lptrapenable

Spanning Tree Configuration Command Set
Configuring Spanning Tree Loop Protect Features
6-138 Matrix DFE-Platinum and Diamond Series Configuration Guide
6.2.3.17 clear spantree lptrapenable
Use this command to return the Loop Protect event notification state to its default state of disabled.
clear spantree lptrapenable
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the Loop Protect event notification state to the default of disabled
Matrix(rw)->clear spantree lptrapenable