Enterasys Matrix 2G4072-52 - Show Flowlimit Class

Security Configuration Command Set
Configuring Flow Setup Throttling (FST)
14-198 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.15.7 show flowlimit class
Use this command to display flow limiting classification configuration(s).
show flowlimit class [userport | serverport | aggregateduser | interswitchlink |
unspecified]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If port classification type is not specified, information related to all classifications
will be displayed.
userport |
serverport |
aggregateduser |
interswitchlink |
unspecified
(Optional) Displays flow limiting information related to the
following classification:
• user port
• server port
• aggregation port
• interswitch link
• unspecified port