Enterasys Matrix 2G4072-52 - Clear Netflow Export-Interval

Logging And Network Management Command Set
Configuring NetFlow
11-162 Matrix DFE-Platinum and Diamond Series Configuration Guide
11.2.8.7 clear netflow export-interval
Use this command to clear NetFlow export interval to its default of 30 minutes.
clear netflow export-interval
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write
Example
This example shows how to return the NetFlow export interval to its default value
:
Matrix(rw)->clear netflow export-interval