Enterasys Matrix 2G4072-52 User Manual

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6-46 Matrix DFE-Platinum and Diamond Series Configuration Guide
6.2.1.33 show spantree maxage
Use this command to display the Spanning Tree maximum aging time.
show spantree maxage
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the Spanning Tree maximum aging time:
Matrix(rw)->show spantree maxage
Bridge Max Age Time is set to 20 seconds

Enterasys Matrix 2G4072-52 Specifications

General

Brand	Enterasys
Model	Matrix 2G4072-52
Category	Switch
Language	English