Logging And Network Management Command Set
Configuring SMON
11-40 Matrix DFE-Platinum and Diamond Series Configuration Guide
11.2.3.3 clear smon priority
Clears priority-encoded user statistics on one or more ports.
clear smon priority [port-string]
Syntax Description
Command Defaults
If port-string is not specified, priority statistics will be cleared on all ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how clear SMON priority statistics on 1-Gigabit Ethernet source port 14 in
module 3:
port-string (Optional) Clears statistics for specific port(s). For a
detailed description of possible port-string values, refer to
Section 4.1.1.
Matrix(rw)->clear smon priority ge.3.14
To Next Page
Loading...
