Enterasys Matrix 2G4072-52 - Clear Port Txq

Port Priority and Rate Limiting Configuration Command Set
Configuring Quality of Service (QoS)
9-14 Matrix DFE-Platinum and Diamond Series Configuration Guide
9.3.3.3 clear port txq
Use this command to clear port transmit queue values.
clear port txq port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear transmit queue values on ge.3.14:
port-string Clears transmit queue values on specific port(s). For a
detailed description of possible port-string values, refer to
Section 4.1.1.
Matrix(rw)->clear port txq ge.3.14