Port Configuration Command Set
Setting Console Port Properties
4-22 Matrix DFE-Platinum and Diamond Series Configuration Guide
4.3.1.16 set console parity
Use this command to set the parity type for one or more console ports.
set console parity {none | odd | even | mark | space} [port-string]
Syntax Description
Command Defaults
If port-string is not specified, parity type will be set for all console ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable even parity checking on console port com.1.1:
none Specifies that no parity checking will be performed.
odd Enables odd parity checking.
even Enables even parity checking.
mark Enables mark parity checking.
space Enables space parity checking.
port-string (Optional) Sets parity type for specific console port(s).
Matrix(rw)->set console parity even com.1.1
To Next Page
Loading...
