Policy Classification Configuration Command Set
Configuring Policy Class of Service (CoS)
8-90 Matrix DFE-Platinum and Diamond Series Configuration Guide
8.3.3.23 show cos violation irl
Use this command to display Class of Service violation configurations.
show cos violation irl [disabled-ports] | [violation-index]
Syntax Description
Command Defaults
If no options are specified, all inbound rate limiting violation information will be
displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to show any CoS inbound rate limiting violations:
disabled-ports (Optional) Displays the port(s) that are disabled because
of violating an inbound rate limiter.
violation-index (Optional) Displays information for a specific violation
index. Valid entries are in the form of port-list:irl-list, or
*.*.*:* for all entries.
Matrix(rw)->show cos violation irl
There are no ports disabled by any irl rate limiters
To Next Page
Loading...
