Enterasys Matrix 2G4072-52 - Set Cli Completion

General Configuration Command Set
Setting Basic Device Properties
Matrix DFE-Platinum and Diamond Series Configuration Guide 2-69
2.2.3.20 set cli completion
Use this command to enable or disable the CLI command completion function. When enabled, this
allows you to complete a unique CLI command fragment using the keyboard spacebar.
set cli completion {enable | disable} [default]
Syntax Description
Command Defaults
If not specified, the status setting will not be maintained as the default.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable the CLI command completion function and maintain it as the
default setting:
enable | disable Enables or disables the CLI command completion
function.
default (Optional) Maintains the status for all future sessions.
Matrix(rw)->set cli completion enable default