Security Configuration Command Set
Configuring MAC Locking
14-130 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.9.10 clear maclock static
Use this command to reset the number of static MAC addresses allowed per port to the default value
of 20.
clear maclock static port_string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset static MAC locking on fe.2.3:
port_string Specifies the port on which to reset the static MAC
locking limit. For a detailed description of possible
port_string values, refer to Section 4.1.1.
Matrix(rw)->clear maclock static fe.2.3
To Next Page
Loading...
