Security Configuration Command Set
Configuring Secure Shell (SSH)
14-152 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.11 Configuring Secure Shell (SSH)
Purpose
To review, enable, disable, and configure the Secure Shell (SSH) protocol, which provides secure
Telnet.
Commands
The commands used to review and configure SSH are listed below and described in the associated
section as shown:
• show ssh state (Section 14.3.11.1)
• set ssh (Section 14.3.11.2)
• set ssh hostkey (Section 14.3.11.3)
• show router ssh (Section 14.3.11.4)
• set router ssh (Section 14.3.11.5)
• clear router ssh (Section 14.3.11.6)
To Next Page
Loading...
Need help?
General