Enterasys Matrix 2G4072-52 - Show Cep Policy

Security Configuration Command Set
Configuring Convergence End Points (CEP) Phone Detection
Matrix DFE-Platinum and Diamond Series Configuration Guide 14-105
14.3.8.3 show cep policy
Use this command to display the global policies of all supported CEP types.
show cep policy
Syntax Description
None.
Command Defaults
None
Command Mode
Read-Only.
Examples
This example shows how to display CEP policy information:
Matrix>show cep policy
CEP default policies
CEP Type Policy Index Policy Name
-------- ------------ ------------
cisco 13 Cisco IP Phone
siemens 9 IP Phone Siemens
h323 3 IP Phone Avaya
sip 0