Port Configuration Command Set
Setting Console Port Properties
Matrix DFE-Platinum and Diamond Series Configuration Guide 4-21
4.3.1.15 show console parity
Use this command to display the type of parity checking set for one or more console ports.
show console parity [port-string]
Syntax Description
Command Defaults
If port-string is not specified, parity type for all console ports will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display parity type for console port com.1.1:
port-string (Optional) Displays parity type for specific console port(s).
Matrix(rw)->show console parity com.1.1
Port Parity
------------ --------
com.1.1 none
To Next Page
Loading...
Need help?
General