General Configuration Command Set
Setting User Accounts and Passwords
Matrix DFE-Platinum and Diamond Series Configuration Guide 2-33
2.2.1.7 set system password history
Use this command to set the number of previously used user login passwords that will be checked
for password duplication. This prevents duplicate passwords from being entered into the system
with the set password command.
set system password history size
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Super User.
Example
This example shows how to configure the system to check the last 10 passwords for duplication
size Specifies the number of passwords checked for
duplication. Valid values are 0 to 10.
Matrix(su)->set system password history 10
To Next Page
Loading...
