Enterasys Matrix 2G4072-52 User Manual

Logging And Network Management Command Set
Managing Switch Network Addresses and Routes
11-110 Matrix DFE-Platinum and Diamond Series Configuration Guide
11.2.5.9 clear ip route
Use this command to delete switch IP routing table entries.
clear ip route destination | default
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear the default gateway:
destination Specifies the IP address of the network or host to be
cleared.
default Clears the default gateway.
Matrix(rw)->clear ip route default

Enterasys Matrix 2G4072-52 Specifications

General

Brand	Enterasys
Model	Matrix 2G4072-52
Category	Switch
Language	English