Policy Classification Configuration Command Set
Configuring Policy Class of Service (CoS)
Matrix DFE-Platinum and Diamond Series Configuration Guide 8-77
8.3.3.12 clear cos port-resource irl
Use this command to clear one or all Class of Service inbound rate limiting port resource
configurations:
clear cos port-resource irl all | group-type-index resource [unit] [rate] [type]
[syslog] [trap] [disable-port] [violators port-list]
Syntax Description
Command Defaults
If no options are specified, all non-default settings will be cleared for the associated
rate limiter.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear all inbound rate limiting settings associated with port group 0.1,
resource entry 0:
all |
group-type-index
Clears all inbound rate limiting port resource entries or a
specific entry.
resource Specifies a resource entry to be cleared.
unit (Optional) Clears the unit of measure setting.
rate (Optional) Clears the data rate setting.
type (Optional) Clears the type of action setting.
syslog (Optional) Clears the Syslog setting.
trap (Optional) Clears the SNMP trap setting.
disable-port (Optional) Clears the disable port setting.
violators port-list (Optional) Clears the limit violation setting.
Matrix(rw)->clear cos port-resource irl 0.1 0
To Next Page
Loading...
Need help?
General