Security Configuration Command Set
Configuring Flow Setup Throttling (FST)
14-206 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.15.13clear flowlimit stats
Use this command to reset flow limiting statistics back to default values on one or more port(s).
clear flowlimit stats [port-string]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
If port-string is not specified, statistics will be reset on all ports.
Example
This example shows how to reset flow limiting statistics back to default values on Fast Ethernet port
5 in module 1:
port-string (Optional) Resets flow limiting statistics on specific port(s).
Matrix(rw)->clear flowlimit stats fe.1.5
To Next Page
Loading...
