Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6-28 Matrix DFE-Platinum and Diamond Series Configuration Guide
6.2.1.16 clear spantree mstmap
Use this command to map a FID back to SID 0.
clear spantree mstmap fid
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to map FID 2 back to SID 0:
fid Specifies one or more FIDs to reset to 0.
Matrix(rw)->clear spantree mstmap 2
To Next Page
Loading...
