General Configuration Command Set
Setting User Accounts and Passwords
Matrix DFE-Platinum and Diamond Series Configuration Guide 2-25
2.2.1.1 show system login
Use this command to display user login account information.
show system login
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Super User.
Example
This example shows how to display login account information. In this case, device defaults have
not been changed:
Table 2-4 provides an explanation of the command output.
Matrix(su)->show system login
Password history size: 0
Password aging : disabled
Username Access State
admin super-user enabled
ro read-only enabled
rw read-write enabled
To Next Page
Loading...
