Logging And Network Management Command Set
Monitoring Network Events and Status
Matrix DFE-Platinum and Diamond Series Configuration Guide 11-29
11.2.2.3 set history
Use this command to set the size of the history buffer.
set history size [default]
Syntax Description
Command Defaults
If default is not specified, the history setting will not be persistent.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the size of the command history buffer to 3 lines and make this the
default setting:
size Specifies the size of the history buffer in lines. Valid values
are 1 to 100.
default (Optional) Makes this setting persist for all future sessions.
Matrix(rw)->set history 3 default
To Next Page
Loading...
Need help?
General