Enterasys Matrix 2G4072-52 - Set Ssh

Security Configuration Command Set
Configuring Secure Shell (SSH)
14-154 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.11.2 set ssh
Use this command to enable, disable or reinitialize SSH server on the device.
set ssh {enable | disable | reinitialize}
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to disable SSH:
enable | disable Enables or disables SSH, or reinitializes the SSH server.
reinitialize Reinitializes the SSH server.
Matrix(rw)->set ssh disable