Enterasys Matrix 2G4072-52 - Monitoring Network Events and Status

Logging And Network Management Command Set
Monitoring Network Events and Status
11-26 Matrix DFE-Platinum and Diamond Series Configuration Guide
11.2.2 Monitoring Network Events and Status
Purpose
To display switch events and command history, to set the size of the history buffer, and to display
and disconnect current user sessions.
Commands
Commands to monitor switch network events and status are listed below and described in the
associated section as shown.
• history (Section 11.2.2.1)
• show history (Section 11.2.2.2)
• set history (Section 11.2.2.3)
• show netstat (Section 11.2.2.4)
• ping (Section 11.2.2.5)
• show users (Section 11.2.2.6)
• tell (Section 11.2.2.7)
• disconnect (Section 11.2.2.8)