Port Configuration Command Set
Disabling / Enabling and Naming Ports
4-38 Matrix DFE-Platinum and Diamond Series Configuration Guide
4.3.3.4 set port alias
Use this command to assign an alias name to a port.
set port alias port-string [string]
Syntax Description
Command Defaults
If string is not specified, the alias assigned to the port will be cleared.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to assign the alias “management” to fe.3.1:
port-string Specifies the port to which an alias will be assigned. For a
detailed description of possible port-string values, refer
to Section 4.1.1.
string (Optional) Assigns a text string name to the port.
Matrix(rw)->set port alias fe.3.1 management
To Next Page
Loading...
Need help?
General