General Configuration Command Set
Activating Licensed Features
2-94 Matrix DFE-Platinum and Diamond Series Configuration Guide
2.2.4.3 clear license
Use this command to clear license key settings.
clear license advanced | user-capacity | port-capacity [slot slot]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
If not specified, the license settings will be cleared from all modules.
Example
This example shows how to clear advanced license key settings:
advanced Clears the advanced routing license setting.
user-capacity Clears the user capacity feature key.
port-capacity Clears the port capacity feature key.
slot slot (Optional) Specifies a module from which the license setting
will be cleared.
Matrix(rw)->clear license advanced
To Next Page
Loading...
