Logging And Network Management Command Set
Configuring SMON
Matrix DFE-Platinum and Diamond Series Configuration Guide 11-43
11.2.3.6 clear smon vlan
Use this command to delete an SMON VLAN statistics counting configuration.
clear smon vlan [port-string]
Syntax Description
Command Defaults
If port-string is not specified, VLAN statistics counting configurations will be
cleared for all ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how clear an SMON VLAN statistics counting configuration from 1-Gigabit
Ethernet source port 14 in module 3:
port-string (Optional) Clears statistics counting configuration(s) for
specific port(s). For a detailed description of possible
port-string values, refer to Section 4.1.1.
Matrix(rw)->clear smon vlan ge.3.14
To Next Page
Loading...
