Security Configuration Command Set
Configuring Multiple Authentication
14-144 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.10.10show multiauth session
Use this command to display multiple authentication session entries.
show multiauth session [all] [agent {dot1x | mac | pwa | cep}] [mac address]
[port port-string]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If no options are specified, multiple authentication session entries will be displayed
for all sessions, authentication types, MAC addresses, and ports.
all (Optional) Displays information about all sessions,
including those with terminated status.
agent | dot1x |
mac | pwa | cep
(Optional) Displays 802.1X, MAC, CEP, or port web
authentication session information.
mac address (Optional) Displays multiple authentication session entries
for specific MAC address(es).
port port-string (Optional) Displays multiple authentication session entries
for specific port(s).
To Next Page
Loading...
Need help?
General