Security Configuration Command Set
Configuring Multiple Authentication
Matrix DFE-Platinum and Diamond Series Configuration Guide 14-145
Example
This example shows how to display multiple authentication session:
Matrix(rw)->show multiauth session
Multiple authentication session entries
-----------------------------------------
Port : fe.2.2 Station address : 00-01-f4-2b-4f-8b
Auth status : success Last attempt : MON MAY 08 14:34:42 2006
Agent type : pwa Session applied : true
Server type : radius VLAN-Tunnel-Attr : None
Policy index : 0 Policy name : No policy applied
Session timeout : 43200 Session duration : 0,00:01:01
Idle timeout : 300 Idle time : 0,00:00:00
Termination time: Not Terminated
To Next Page
Loading...
