Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6-20 Matrix DFE-Platinum and Diamond Series Configuration Guide
6.2.1.8 show spantree maxconfigurablestps
Use this command to display the setting for the maximum number of user configurable Spanning
Tree instances.
show spantree maxconfigurablestps
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the STP maximum configs setting.
Matrix(rw)->show spantree maxconfigurablestps
Max user configurable stps is set to 33
To Next Page
Loading...
Need help?
General