General Configuration Command Set
Setting Basic Device Properties
2-62 Matrix DFE-Platinum and Diamond Series Configuration Guide
2.2.3.15 set summertime
Use this command to enable or disable the daylight savings time function.
set summertime {enable | disable} [zone]
Syntax Description
Command Defaults
If a zone name is not specified, none will be applied.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable daylight savings time function:
enable | disable Enables or disables the daylight savings time function.
zone (Optional) Applies a name to the daylight savings time
settings.
Matrix(rw)->set summertime enable
To Next Page
Loading...
