Security Configuration Command Set
Configuring Convergence End Points (CEP) Phone Detection
Matrix DFE-Platinum and Diamond Series Configuration Guide 14-103
14.3.8.1 show cep connections
Use this command to display all learned CEPs.
show cep connections port-string
Syntax Description
Command Defaults
None
Command Mode
Read-Only.
Example
This example shows how to display CEP connections for port fe.1.21:
port-string Displays CEP status for one or more ports. For a detailed
description of possible port-string values, refer to
Section 4.1.1.
Matrix>show cep connections fe.1.21
Connection Info for fe.1.21
Endpoint Type h323
Policy Index 3
Discovery Time MON FEB 06 02:31:42 2006
Firmware Version
Address Type unknown
Endpoint IP unavailable
Endpoint MAC 00:04:0d:01:f8:35
To Next Page
Loading...
