Enterasys Matrix 2G4072-52 - Set Multiauth Precedence

Security Configuration Command Set
Configuring Multiple Authentication
Matrix DFE-Platinum and Diamond Series Configuration Guide 14-137
14.3.10.3 set multiauth precedence
Use this command to set the system’s multiple authentication administrative precedence.When a
user is successfully authenticated by more than one method at the same time, the precedence of the
authentication methods will determine which RADIUS-returned filter ID will be processed and
result in an applied traffic policy profile.
set multiauth precedence {[dot1x] [mac] [pwa]}
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Examples
This example shows how to set precedence for MAC authentication
:
dot1x Sets precedence for 802.1X authentication.
mac Sets precedence for MAC authentication.
pwa Sets precedence for port web authentication.
Matrix(rw)->set multiauth precedence mac