Logging And Network Management Command Set
Configuring SMON
Matrix DFE-Platinum and Diamond Series Configuration Guide 11-39
11.2.3.2 set smon priority
Use this command to create, start, or stop priority-encoded SMON user statistics counting.
set smon priority {create | enable | disable} port-string [owner]
Syntax Description
Command Defaults
If owner is not specified, none will be applied.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how set the device to gather SMON priority statistics from 1-Gigabit Ethernet
port 14 in module 3:
create | enable |
disable
Creates, enables, or disables SMON priority statistics
counting. Create automatically enables (starts) counters.
port-string Specifies one or more source ports on which to collect
statistics. For a detailed description of possible port-string
values, refer to Section 4.1.1.
owner (Optional) Specifies an administratively assigned name of
the owner of this entity.
Matrix(rw)->set smon priority ge.3.14
To Next Page
Loading...
