Enterasys Matrix 2G4072-52 - Show Port Alias

Port Configuration Command Set
Disabling / Enabling and Naming Ports
Matrix DFE-Platinum and Diamond Series Configuration Guide 4-37
4.3.3.3 show port alias
Use this command to display alias name(s assigned to one or more ports.
show port alias [port-string]
Syntax Description
Command Defaults
If port-string is not specified, aliases for all ports will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display alias information for fe.3.1. In this case, an alias has not been
assigned:
port-string (Optional) Displays alias name(s) for specific port(s). For
a detailed description of possible port-string values, refer
to Section 4.1.1.
Matrix(rw)->show port alias fe.3.1
Alias not assigned on port fe.3.1.