VLAN Configuration Command Set
Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
Matrix DFE-Platinum and Diamond Series Configuration Guide 7-19
7.3.3.6 clear vlan interface
Use this command to clear the MIB-II interface entry mapped to a VLAN.
clear vlan interface vlan-list
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear the interface entry mapped to VLAN 1:
vlan-list Specifies the VLAN(s) for which an interface entry will
be cleared.
Matrix(rw)->clear vlan interface 1
To Next Page
Loading...
