General Configuration Command Set
Activating Licensed Features
Matrix DFE-Platinum and Diamond Series Configuration Guide 2-91
2.2.4 Activating Licensed Features
In order to enable advanced features, such as increased user and port capacity, advanced routing
protocols, and extended ACLs on a Matrix Series device, you must purchase and activate a license
key. If you have purchased a license, you can proceed to activate your license as described in this
section. If you wish to purchase a license, contact Enterasys Networks Sales.
Purpose
To activate and verify licensed features.
Commands
The commands used to activate and verify licensed features are listed below and described in the
associated section as shown:
• set license (Section 2.2.4.1)
• show license (Section 2.2.4.2)
• clear license (Section 2.2.4.3)
To Next Page
Loading...
