VLAN Configuration Command Set
Creating and Naming Static VLANs
7-6 Matrix DFE-Platinum and Diamond Series Configuration Guide
7.3.2 Creating and Naming Static VLANs
Purpose
To create a new static VLAN, or to enable or disable existing VLAN(s).
Commands
The commands used to create and name static VLANs are listed below and described in the
associated section as shown.
• set vlan (Section 7.3.2.1)
• set vlan name (Section 7.3.2.2)
• clear vlan (Section 7.3.2.3)
• clear vlan name (Section 7.3.2.4)
To Next Page
Loading...
