Enterasys Matrix 2G4072-52 - Set Pwa Banner

Security Configuration Command Set
Configuring Port Web Authentication (PWA)
Matrix DFE-Platinum and Diamond Series Configuration Guide 14-61
14.3.6.6 set pwa banner
Use this command to configure a string to be displayed as the PWA login banner.
set pwa banner string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the PWA login banner to “Welcome to Enterasys Networks”:
string Specifies the PWA login banner.
Matrix(rw)->set pwa banner “Welcome to Enterasys Networks”