Enterasys Matrix 2G4072-52 - Commands

Logging And Network Management Command Set
Configuring NetFlow
11-154 Matrix DFE-Platinum and Diamond Series Configuration Guide
more often than once per second, as a minimum. For more information about setting the refresh
rate, see the Usage discussion in Section 11.2.8.12.
Commands
Commands to configure NetFlow are listed below and described in the associated section as shown.
• show netflow (Section 11.2.8.1)
• set netflow cache (Section 11.2.8.2)
• clear netflow cache (Section 11.2.8.3)
• set netflow export-destination (Section 11.2.8.4)
• clear netflow export-destination (Section 11.2.8.5)
• set netflow export-interval (Section 11.2.8.6)
• clear netflow export-interval (Section 11.2.8.7)
• set netflow port (Section 11.2.8.8)
• clear netflow port (Section 11.2.8.9)
• set netflow export-version (Section 11.2.8.10)
• clear netflow export-version (Section 11.2.8.11)
• set netflow template (Section 11.2.8.12)
• clear netflow template (Section 11.2.8.13)