Enterasys Matrix 2G4072-52 - Clear Policy Port-Hit

Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
8-56 Matrix DFE-Platinum and Diamond Series Configuration Guide
8.3.2.18 clear policy port-hit
Use this command to clear rule port hit indications on one or more ports.
clear policy port-hit {all | port-list port-list}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear rule port hit indications on all ports:
all | port-list
port-list
Clears port hit indications on all ports or on one or more
specified ports.
Matrix(rw)->clear policy port-hit all