SNMP Configuration Command Set
Configuring SNMP Access Rights
5-26 Matrix DFE-Platinum and Diamond Series Configuration Guide
5.3.3 Configuring SNMP Access Rights
Purpose
To review and configure SNMP access rights, assigning viewing privileges and security levels to
SNMP user groups.
Commands
The commands used to review and configure SNMP access are listed below and described in the
associated section as shown.
• show snmp access (Section 5.3.3.1)
• set snmp access (Section 5.3.3.2)
• clear snmp access (Section 5.3.3.3)
To Next Page
Loading...
