Enterasys Matrix 2G4072-52 - Clear Spantree Maxconfigurablestps

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6-22 Matrix DFE-Platinum and Diamond Series Configuration Guide
6.2.1.10 clear spantree maxconfigurablestps
Use this command to clear the setting for the maximum number of user configurable Spanning Tree
instances.
clear spantree maxconfigurablestps
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear the STP max configs setting
Matrix(rw)->clearspantree maxconfigurablestps