SNMP Configuration Command Set
Configuring SNMP Notification Parameters
Matrix DFE-Platinum and Diamond Series Configuration Guide 5-63
5.3.7.9 clear snmp notifyprofile
Use this command to delete an SNMP notify profile configuration.
clear snmp notifyprofile profile targetparam targetparam
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to delete SNMP notify profile “area51”:
profile Specifies an SNMP filter notify name to delete.
targetparam
targetparam
Specifies an associated entry in the
snmpTargetParamsTable.
Matrix(rw)->clear snmp notifyprofile area51 targetparam v3ExampleParams
To Next Page
Loading...
Need help?
General