Enterasys Matrix 2G4072-52 - Clear Vlanauthorization

Security Configuration Command Set
Configuring RFC 3580
Matrix DFE-Platinum and Diamond Series Configuration Guide 14-23
14.3.3.3 clear vlanauthorization
Use this command to clear the VLAN Authorization attributes to the defaults.
clear vlanauthorization port-list all
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to clear VLAN Authorization:
This example shows how to clear VLAN Authorization for ports ge.1.1-4:
port-list (Optional) Clear port(s) attributes for VLAN Authorization.
all Clear all VLAN Authorization to the defaults.
Matrix(su)->clear vlanauthorization
Matrix(su)->clear vlanauthorization ge.1.1-4