Logging And Network Management Command Set
Configuring NetFlow
11-158 Matrix DFE-Platinum and Diamond Series Configuration Guide
11.2.8.3 clear netflow cache
Use this command to remove, or free up, the NetFlow caches on each DFE blade in the Matrix
system. When this command is executed, NetFlow is effectively disabled on the system.
clear netflow cache
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write
Example
This example shows how to remove the NetFlow caches on the DFE blades and disable NetFlow
:
Matrix(rw)->clear netflow cache
To Next Page
Loading...
