Spanning Tree Configuration Command Set
Configuring Spanning Tree Loop Protect Features
Matrix DFE-Platinum and Diamond Series Configuration Guide 6-137
6.2.3.16 show spantree lptrapenable
Use this command to display the current status of Loop Protect event notification.
show spantree lptrapenable
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the current Loop Protect event notification status:
Matrix(rw)->show spantree lptrapenable
LoopProtect event traps are enabled
To Next Page
Loading...
