Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
8-48 Matrix DFE-Platinum and Diamond Series Configuration Guide
8.3.2.11 clear policy allowed-type
Use this command to clear the list of traffic rules currently assigned to the admin profile for one or
more ports. This will reassign the default setting, which is all rules are allowed.
clear policy allowed-type port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear the allowed rule list from port ge.1.5:
port-string Specifies port(s) on which to clear traffic rules.
Matrix(rw)->clear policy allowed-type ge.1.5
To Next Page
Loading...
Need help?
General