Enterasys Matrix 2G4072-52 User Manual

General Configuration Command Set
Configuring Power over Ethernet (PoE)
Matrix DFE-Platinum and Diamond Series Configuration Guide 2-115
2.2.5.18 clear port inlinepower
Use this command to reset PoE parameters on one or more ports to default values.
clear port inlinepower port-string {[admin] [priority] [type] [powerlimit]}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to rest the PoE priority on port fe.3.1 to low:
port-string Specifies the port(s) on which to reset PoE.
admin Resets the PoE administrative state to auto (on).
priority Resets the port(s) priority for the PoE allocation
algorithm to low.
type Resets the port type to an empty string.
powerlimit Resets the maximum power to 15400 megawatts.
Matrix(rw)->clear port inlinepower fe.3.1 priority

Enterasys Matrix 2G4072-52 Specifications

General

Brand	Enterasys
Model	Matrix 2G4072-52
Category	Switch
Language	English