Enterasys Matrix 2G4072-52 - Clear Cos Reference Txq

Policy Classification Configuration Command Set
Configuring Policy Class of Service (CoS)
8-86 Matrix DFE-Platinum and Diamond Series Configuration Guide
8.3.3.19 clear cos reference txq
Use this command to clear one or all non-default Class of Service transmit queue reference
configurations.
clear cos reference txq {all | group-type-index reference}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear all Class of Service transmit queue reference entries:
all |
group-type-index
Clears all non-default transmit queue reference entries or
a specific entry.
reference Specifies a reference number of the entry to be cleared.
Matrix(rw)->clear cos reference txq all