Enterasys Matrix 2G4072-52 - Set Pwa Displaylogo

Security Configuration Command Set
Configuring Port Web Authentication (PWA)
Matrix DFE-Platinum and Diamond Series Configuration Guide 14-63
14.3.6.8 set pwa displaylogo
Use this command to set the display options for the Enterasys Networks logo.
set pwa displaylogo {display | hide}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to hide the Enterasys Networks logo:
display | hide Displays or hides the Enterasys Networks logo when the
PWA website displays.
Matrix(rw)->set pwa displaylogo hide